Filling the toner cartridge Brother TN3060, DCP-8040, DCP-8040-LT, DCP-8045 DCP-8045-D, DCP-8045-DN, HL-5130, HL-5140, HL-5140-LT, HL-5150, HL -5150-D, HL-5150-DLT, HL-5170, HL-5170-DLT, HL-5170-DN, HL-5170-DNLT, MFC-8220, MFC-8240, MFC-8240-LT, MFC-8440 , MFC-8440-D, MFC-8440-DN, MFC-8440-LT, MFC-8440-N, MFC-8640, MFC-8640-D, MFC-8840, MFC-8840-D, MFC-8840-DN , MFC-8840-LT:
Insert the toner cartridge TN3060 like in the picture in front of you. There is a cover on the side. You have to remove this in order to then use a funnel to fill the refill toner into this opening. Then close the opening again with the previously removed cover. The cartridge is now full.
If you want to fill your cartridge the second time, you should empty the waste toner box. With this device, this is not located directly on the cartridge, but in the printer. The waste toner box can be removed similarly to the cartridge.
Safety note for handling refill toner:
Refill toner and toner powder can be harmful to health if improperly handled. We expressly recommend the use of respiratory protection equipment or suction chambers when filling toner cartridges. In addition, toner powder and refill toner can be extremely flammable with an appropriate oxygen mixture.
Also, be careful not to touch the photoconductor drum or expose it to direct sunlight. This can lead to incorrect printouts.
Eurotone assumes no responsibility for the success or failure of the procedure described.
All manufacturers and brand names are only used to indicate compatibility and are the property of their respective owners. Eurotone assumes no guarantee, responsibility or liability for the success or any consequences resulting from the procedures in its manuals.