+49 (0)30 66778166
de German▼
X
nl Dutchen Englishfi Finnishfr Frenchde Germanit Italianpt Portugueseru Russianes Spanishtr Turkish

Refill Toner (Instructions) HP CE285A / 85A

For HP Laser Jet M 1100, M 1132 MFP, M 1134 MFP, M 1136 MFP, M 1137 MFP, M 1138 MFP, M 1139 MFP, P 1100, P 1102, P 1102 w, P 1103, P 1104, P 1104 w, P 1106, P 1106 w, P 1107, P 1107 w, P 1108, P 1108 w, P 1109, P 1109 w, M 1130 MFP, M 1132 MFP, M 1134 MFP, M 1136 MFP, M 1137 MFP, M 1138 MFP, M 1139 MFP, M 1200, M 1210 MFP, M 1212 nf MFP, M 1213 nf MFP, M 1214 nfh MFP, M 1216 nfh MFP, M 1217 nfw MFP, M 1218 nfs MFP, M 1219 nfs MFP, P 1002 , P 1002, P 1002 W, P 1002 WL, P 1100, P 1101, P 1102, P 1102 w, P 1103, P 1104, P 1104 w, P 1106, P 1106 w, P 1108, P 1108 w, P 1109, P 1109 w, M 1100, M 1130, M 1132 MFP, M 1134 MFP, M 1136 MFP, M 1137 MFP, M 1138 MFP, M 1139 MFP, M 1200, M 1210, M 1212 nf MFP, M 1213 nf MFP, M 1214 nfh MFP, M 1216 nfh MFP, M 1217 nfw MFP, M 1218 nfs MFP, M 1219 nf MFP, M 1219 nfs MFP, MFP M 30 a, MFP M 30 w, P 1100, P 1101, P 1102 , P 1102 w, P 1103, P 1104, P 1104 w, P 1106, P 1106 w, P 1108, P 1108 w, P 1109, P 1109 w

Figure 1
Figure 2

Take out the toner cartridge CE285A, 85A from your printer and place it on the table in front of you (Figure 1). Use a soldering iron to burn a filler opening at the location shown in Figures 1 and 2. Neatly deburr the filling opening so that the fabric adhesive tape sticks firmly to it after filling. Make sure that no plastic shavings fall into the toner chamber, as these could damage the printing mechanism. Shake out the remaining toner, as the different chemical and physical properties can cause the old and new toner powder to clump together.

Figure 3 - Filling the cartridge

Filling the HP toner cartridge CE285A, 85A

Take the toner bottle and screw a funnel onto it. Shake the toner bottle gently so that the toner powder has better flow properties. Put the toner in the cartridge (Figure 3). When you have filled the cartridge, you have to close the filler opening again. To do this, cut a piece of fabric tape and stick it to the filling opening. 

Proceed as follows to replace the toner chip:

Since the HP CE285A, 85A has a toner chip that monitors the toner level, you must replace it after each refill. Take the new toner chip and put it in the same place as the original chip (Figure 4). If necessary, fix the replacement chip with a drop of hot glue or double-sided adhesive tape.

By changing the chip, the printer will now recognize your toner cartridge as full. Please always refill toner powder so that your toner cartridge has the full capacity of the page. If you do not do this, the printer may still recognize the cartridge as empty due to a lack of toner powder. In this case the toner chip loses its function. The toner chip can be used once.

Figure 4

After filling it once or twice, it is advisable to empty the waste toner box, otherwise a proper print image cannot be guaranteed.

Safety note for handling refill toner:
Refill toner and toner powder can be harmful to health if improperly handled. We expressly recommend the use of respiratory protection equipment or suction chambers when filling toner cartridges. In addition, toner powder and refill toner can be extremely flammable with an appropriate oxygen mixture. Also, be careful not to touch the photoconductor drum or expose it to direct sunlight. This can lead to incorrect printouts.
Eurotone assumes no responsibility for the success or failure of the procedure described.

All manufacturers and brand names are used only to indicate compatibility and are the property of their respective owners. Eurotone® assumes no guarantee, responsibility or liability for the success or any consequences resulting from the procedures in its instructions.