+49 (0)30 66778166
de German▼
X
nl Dutchen Englishfi Finnishfr Frenchde Germanit Italianpt Portugueseru Russianes Spanishtr Turkish

Reset instructions for Brother DR 130CL drum

translate instructions

de German▼
X
nl Dutchen Englishfi Finnishfr Frenchde Germanit Italianpt Portugueseru Russianes Spanishtr Turkish

Your step-by-step guide on how to reset your Brother DR-130CL

The Brother DR-130CL drum fits many Brother printers and can be reset in a few simple steps. The Brother DR-130 CL Drum Reset restarts the drum detection in the printer and resets the drum counter.

The following instructions should be followed when performing a toner reset on the printer!

  • Choose the right Brother DR-130CL drum reset guide for your Brother HL series, Brother DCP series or Brother MFC series printer.
  • Please execute the reset command quickly using the printer keyboard so that you do not fall back to the main menu while typing.
  • Follow each step of the guide and don't skip a step.
  • Not every Brother printer will signal successful completion with a message ("Accepted" or "Completed") after the reset.
  • You can use the instructions to reset original Brother DR-130CL drums and compatible drums.
  • Resetting the drum prematurely can damage the device. Therefore, only reset the drum immediately after replacing it.
  • In case of multiple selection, select the drum to reset.

Brother DR-130CL drum reset for Brother HL devices
1. Turn on the printer.
2. 3. Confirm with "OK".
4. Press the "+" or "-" button.
5. "Reset Lifetime" will appear.
6. Confirm with "OK".
7. Long press the "+" or "-" button.
8. The display will show "Drum Unit".
9. Quickly press “OK” twice.

The Brother DR-130CL drum reset has been performed.

Brother DR-130CL drum reset for Brother MFC devices
1. Turn on the printer.
2. Press the "Menu" button
3. Use the arrow keys to navigate to "Device info".
4. Confirm with "OK".
5. Use the arrow keys to go to "Reset Menu".
6. Confirm with "OK".
7. Press the arrow keys until "Drum" appears on the display
8. Confirm with "OK".
9. Then press "1".
10. Select the "Stop" button to complete the process.

The Brother DR-130CL drum reset has been performed.

Brother DR-130CL drum reset for Brother DCP machines
1. Turn on the printer.
2. Press the "Menu" button
3. Use the arrow keys to navigate to "Device info".
4. Confirm with "OK".
5. Use the arrow keys to go to "Reset Menu".
6. Confirm with "OK".
7. Press the arrow keys until "Drum" appears on the display
8. Confirm with "OK".
9. Then press "1".
10. Select the "Stop" button to complete the process.

The Brother DR-130CL drum reset has been performed.