Reset instructions for Brother DR 2400 drum

translate instructions

Dutch

Your step-by-step guide on how to reset your Brother DR-2400

The Brother DR-2400 drum fits many Brother printers and can be reset in a few simple steps. The Brother DR-2400 Drum Reset restarts the drum detection in the printer and resets the drum counter.

The following instructions should be followed when performing a toner reset on the printer!

Choose the right Brother DR-2400 drum reset guide for your Brother HL series, Brother DCP series, or Brother MFC series.
Please execute the reset command quickly using the printer keyboard so that you do not fall back to the main menu while typing.
Follow each step of the guide and don't skip a step.
Not every Brother printer will signal successful completion with a message ("Accepted" or "Completed") after the reset.
With the instructions you can reset original Brother DR-2400 drums and compatible drums.
Resetting the drum prematurely can damage the device. Therefore, only reset the drum immediately after replacing it.
In case of multiple selection, select the drum to reset.

Brother DR-2400 drum reset for Brother HL devices

1. Turn on the printer
2. The Drum LED should be flashing
3. Open the front cover
4. Press the "GO" button for 4 seconds
5. All LEDs light up
6. Release the GO button
7. Close the cover, the drum LED should no longer be lit

The Brother DR-2400 drum reset has been performed.

Brother DR-2400 drum reset for Brother DCP machines

1. Turn on the printer
2. The front cover must be closed
3. Simultaneously press "OK" and "arrow key up"
4. Confirm with "OK"
5. Press the "down arrow"

The Brother DR-2400 drum reset has been performed.

Brother DR-2400 drum reset for Brother MFC devices

1. Turn on the printer
2. The front cover must be closed
3. Simultaneously press "OK" and "Arrow up"
4. Confirm with "OK"
5. Press the "down arrow"

The Brother DR-2400 drum reset has been performed.

Brother DR-2400 drum reset for Brother models with touchscreen

1. Turn on the printer
2. The front cover must be closed
3. Press and hold the X button for 5 seconds
4. Press drum/drum and confirm with "YES"

The Brother DR-2400 drum reset has been performed.