Reset instructions for Brother DR 320 CL drum

Your step-by-step guide on how to reset your Brother DR-320 CL

The Brother DR-320CL drum fits many Brother printers and can be reset in a few simple steps. The Brother DR-320CL Drum Reset restarts the drum detection in the printer and resets the drum counter. The following instructions should be observed when performing a toner reset on the printer!

• Choose the right Brother DR-320CL drum reset guide for your Brother HL series Brother DCP series or Brother MFC series.
• Please execute the reset command quickly using the printer keyboard so that you do not fall back to the main menu while typing.
• Follow each step of the guide and don't skip a step.
• Not every Brother printer will signal successful completion with a message ("Accepted" or "Completed") after the reset.
• You can use the instructions to reset original Brother DR-320CL drums and compatible drums.
• Resetting the drum prematurely can damage the device. Therefore, only reset the drum immediately after replacing it.
• In case of multiple selection, select the drum to reset.

Brother DR-320CL drum reset for Brother HL devices

1. The top cover on your printer must be closed
2. Switch on the device
3. Press "+" or "-" to get to "Device info".
4. Confirm the selection with "OK"
5. Press "+" or "-" to get to "Reset Lifetime".
6. Confirm your selection with "OK".
7. Then press "+" to get to "Drum".
8. Confirm again with "OK"
9. Press "+" to reset the drum counter The Brother

DR-320CL drum reset has been performed.

Brother DR-320CL drum reset for Brother DCP machines

1. Close the top cover flap
2. Turn on the device.
3. Quickly press the Menu, 8, and 5 keys.
4. Use the arrow keys to navigate to "Drum Unit"
5. Quickly confirm with "OK".
6. Immediately press "1" to reset the counter
7. Press the "Stop" button

The Brother DR-320CL drum reset has been performed.

Brother DR-320CL drum reset for Brother MFC devices

1. Close the top cover
2. Switch on the device
3. Quickly press the "Menu", "8" and "4" keys.
4. Move the arrow keys to the menu item "Drum"
5. Confirm with "OK"
6. Press key "1" to reset.
7. Then press the "Stop" button

The Brother DR-320CL drum reset has been performed.