Reset instructions for Brother DR 7000 drum

Your step-by-step guide on how to reset your Brother DR-7000

The Brother DR-7000 drum fits many Brother printers and can be reset in a few simple steps. The Brother DR-7000 Drum Reset restarts the drum detection in the printer and resets the drum counter.

The following instructions should be followed when performing a toner reset on the printer!

• Choose the right Brother DR-7000 drum reset guide for your Brother HL series Brother DCP series or Brother MFC series
• Please execute the reset command quickly using the printer keyboard so that you do not fall back to the main menu while typing.
• Follow each step of the guide and don't skip a step.
• Not every Brother printer will signal successful completion with a message ("Accepted" or "Completed") after the reset.
• With the instructions you can reset original Brother DR-7000 drums and compatible drums.
• Resetting the drum prematurely can damage the device. Therefore, only reset the drum immediately after replacing it.
• In case of multiple selection, select the drum to reset.

Brother DR-7000 drum reset for Brother HL devices

1. Turn on the printer
2. Open the device door
3. Now press and hold the "Cancel" button
4. Hold the button until all four LEDs on the printer light up
5. Release the button
6. Close the device door

The Brother DR-7000 drum reset has been performed.

Brother DR-7000 drum reset for Brother DCP machine

1. Turn on the printer
2. Open the device door
3. Press the "Cancellation" button
4. Immediately afterwards press key "1" on the printer
5. The display shows "successful" 
6. Close the device flap again

The Brother DR-7000 drum reset has been performed

Brother DR-7000 drum reset for Brother MFC machine

1. Switch on the device
2. Open the device door
3. With the flap open, press "Storno"
4. Confirm by pressing key "1"
5. The display shows "successful".
6. You can close the flap again

The Brother DR-7000 drum reset has been performed