+49 (0)30 66778166
de German

Reset Instructions for Brother TN 2010 Toner

translate instructions

de German

Your step-by-step guide on how to reset your Brother TN-2010

The Brother TN-2010 toner fits into many Brother printer models and can be reset with no problems. The Brother TN-2010 Toner Reset restarts the toner detection and resets the page counter.

The following instructions should be followed when performing a toner reset on the printer!

  • Choose the appropriate Brother TN-2010 toner reset guide for your printer (Brother DPC series or Brother HL series)
  • Please follow the reset instructions quickly using the printer keyboard so that you do not return to the main menu
  • Note the individual steps in the instructions and do not skip any of the steps
  • Not every Brother printer signals the successful completion with a message ("Accepted" or "Done") after the reset
  • You can use the guide to reset genuine Brother TN-2010 and compatible toners
  • If you have several options, choose your toner (starter toner / standard toner / jumbo XXL toner)
  • With multiple selections you decide on the color of the toner cartridge or reset all CMYK colors. (CMYK stands for: C = cyan, M = magenta, Y = yellow, K = black)

Brother TN-2010 Toner Reset for Brother DPC devices

For a manual toner reset for Brother DPC devices, please proceed exactly as follows

Instructions:
1. Turn on the printer
2. Open the front flap
3. Press the CANCEL button 1x
4. "Replace drum?" 1. YES 2. NO
5. Select nothing, immediately continue with the next point
6. Press the START button and immediately the arrow buttons ▼ ▲ until "00" appears in the display
7. Now press the OK button
8. Close the front door

You have successfully reset the original or compatible Brother TN-2010 toner.

 

Brother TN-2010 Toner Reset for Brother HL devices

For a manual toner reset for Brother HL devices, please proceed exactly as follows

instructions
1. Turn off your device
2. Open the front flap
3. Press and hold the GO button
4. Turn the printer back on
5. Press and hold the GO button
6. The TONER / DRUM / ERROR LEDs light up
7. Release the GO button
8. Press the GO button twice quickly
9. The TONER / DRUM / ERROR LEDs light up again
10. Now select your toner:
11. Press the GO button 5 times for starter toner
12. Press the GO button 6 times for Standard Toner
13. Press the GO button 7 times for jumbo toner
14. Close the front door

You have successfully reset the original or compatible Brother TN-2010 toner.